BH S3TiB Manuel Du Propriétaire page 16

ASSEMBLY INSTRUCTIONS
STEP 1 (this step will require two people)
Take the treadmill and the parts from the carton. Take the right upright post and connect
the wire on the bottom of the post with the wire in the bracket at the front right of the
machine. After connecting the wires, slide the right upright post into the right bracket.
Make sure not to pinch the wires. Take the left upright post and place it in the left bracket.
Secure the posts with 6 pcs of Screws (13). Leave them hand tight.
Left Upright Post Right Upright Post
13
16