Publicité
Les langues disponibles
Les langues disponibles
3. Door Right-Left Change
Precautions before installation:
Unplug your freezer before you reverse the door. Failure to unplug your freezer may result in
serious injury or death from electrical shock.
To avoid personal injury and property damage, get another person to help you reverse the
door.
You will need the following tools to reverse the freezer door:
Flat-blade
screwdriver
Follow the following stages to reverse the door from its initial position:
1. Unplug your freezer.
2. Remove the hinge cover, then remove the top hinge screws and hinge from your freezer.
Remove the pin from the top edge of the door, then remove the hole cover from the other
side of the freezer.
Hole cover
3. While one person tilts your freezer backwards, remove the bottom hinge screws and hinge
and the two leveling feet. Install the bottom hinge and leveling feet on the other side.
Leveling foot
You can lay your freeze flat on the floor to make removing and installing the bottom hinge
easier. If you do lay it flat, when you return it to the upright position, wait two hours before
you plug it in.
Phillips
screwdriver
5/16" socket
wrench
Putty knife
- 24 -
Top hinge
Hinge cover
Bottom hinge and screws
Publicité
