Beurer BC 30 Mode D'emploi page 21

Adopt the correct posture
• Before every measurement, relax for about
five minutes. Otherwise deviations can
occur.
• You can perform the
measurement while sit-
ting or lying. To carry out
a blood pressure meas-
urement, make sure you
are sitting comfortably
with your arms and back leaning on some-
thing. Do not cross your legs. Place your
feet flat on the ground. Make sure to rest
your arm and do not move it. Always make
sure that the cuff is at heart level. Otherwise
significant deviations can occur. Relax your
arm and the palm of your hand.
• To avoid falsifying the measurement, it is
important to remain still during the meas-
urement and not to speak!
• • • • • • • • • • • • •
21
Selecting memory
Press the button to display the date/time
and current user memory. Select the desired
user memory by pressing the user selection
button . Confirm your selection with the
button. You have 2 memories with 60 memory
spaces each to store the measurements of 2
different people separately or to separate mea-
surements taken in the morning and at night.
Performing the blood pressure
measurement
• As described above, attach the cuff and
adopt the posture in which you want to per-
form the measurement.
• Select the user memory
measurement by holding the
Following the display check, during which
all numbers appear, the cuff inflates auto-
matically. Whilst the cuff is pumping up, the
device already calculates measurements for
estimating the necessary pump pressure.
or . Start the
button.