Publicité
Les langues disponibles
Les langues disponibles
STEP 5:
Place the quick connect nozzles (I) in the
nozzle holder.
I
STEP 6:
Attach the wand to the spray gun.
Push the wand (J) into the trigger gun (H) and
then thread the connection.
J
STEP 1:
Pull the spring-loaded collar of the wand back
to insert your choice of quick connect nozzle.
Release the collar and push the nozzle until
the collar clicks.
CAUTION
High pressure in nozzle area.
Risk of injury caused by improperly locked
nozzle.
Assembling
H
OPERATING INSTRUCTIONS
STEP 7:
Place the Spray Gun (H) into the Gun Holder
and the Wand (J) into the Wand Holder.
■
Make sure you hear a "click" when inserting
the nozzle tip in to the wand.
■
Pull the nozzle to make sure it is seated
properly before operating your unit.
STEP 2:
Pull back the spring loaded collar at the spray
gun and insert the high pressure hose.
Release the collar and push the high pressure
hose until the collar clicks.
J
H
English 7
Publicité
