·
Move the cover caps from one side to the other.
·
Remove the lower hinge (4) and the left adjustable foot.
! Attention: the inclination of the refrigerator must be less than 45° so that the compressor oil does not
enter the cooling circuit. If you do shut down the unit completely, wait 24 hours before turning it back on.
·
Remove the hinge pin from the plate and turn it 180°. Remount the pin in the hinge so that it
protrudes upwards when the hinge is turned.
·
Attach this hinge to the bottom of the appliance on the left-hand side and the adjustable foot on the
right. Refit the bottom door to the appliance.
·
Move the screw covers and the handle from one side of the lower door to the other.
·
Attach the middle hinge.
58
DO91307C