Domo DO91307C Mode D'emploi page 57

DOOR CONVERSION
If you need to hinge your door on the opposite side, it is recommended that you call your local authorised
service agent to make this conversion or ask a technician. Before you reverse the door, you should ensure
the appliance is unplugged and empty. After reversing the door, leave the appliance alone for 12 hours
before switching it on. This allows the coolant to set.
1. Upper hinge cover
2. Upper hinge
3. Middle hinge
4. Lower hinge
5. Feet
· Remove the upper hinge cover (1).
· Remove the upper hinge (2).
· Move the screw covers and the handle from one side of the upper door to the other. Then remove the
upper door and place it on a soft surface to avoid scratching it.
· Remove the middle hinge (3). Remove the lower door and place it on a soft surface to avoid scratching
it.
www.domo-elektro.be
57
DO91307C