Publicité
1.
Mark the area and then cut the wall for vent
installation if needed.
2. Install the wall thimble as specified by the
manufacturer. (wall thimble sold separately)
3. Install venting.
VENTING YOUR PELLET STOVE INTO
AN EXISTING CLASS A 6" CHIMNEY
SYSTEM
IMPORTANT:
IF YOU ARE INSTALLING YOUR PELLET STOVE
AS A REPLACEMENT TO AN EXISTING WOOD
STOVE, YOU CAN INSTALL YOUR PELLET
STOVE USING THE EXISTING
VENTING SYSTEM.
1.
You must have the existing chimney system
cleaned and/ or inspected by a qualified
chimney sweep before proceeding with the
installation of your pellet stove.
2. To the right is an example of an installation
using part number 860001, 3-6" transition into
6" connector pipe. The illustration is only an
example. Please conform to any local building
codes or regulations having jurisdiction before
you have a qualified installer proceed with this
installation.
© 2023 United States Stove Company
CLASS A 6"
10
INSTALLATION
Ceiling
Support
To Stove
Existing Class 'A'
6" Chimney System
Support
Bracket
3" to 6" Pipe
Adapter
3" PL Vent
Clean Out Tee
Publicité
