fadini NYOTA 115 evo Mode D'emploi page 23

Nyota 115 evo
MOUNTING THE MAGNETIC LIMIT SWITCH BRACKETS
NOTE WELL: DO NOT OPEN THE BRACKETS TO REVERSE THE ARRAY OF THE INNER MAGNETS; THEY ARE
!
PROPERLY PRE-ARRANGED FOR THE LOGIC CONTROL BOARD TO IDENTIFY THEM.
Limit switch
left-hand
SX bracket
NOTE WELL: IT IS FUNDAMENTAL THAT THE GATE DOES NOT RUN INTO THE GATE STOPS TOO FAST ON
!
OPENING AND CLOSING CYCLES; A 30-50 mm CLEARANCE SHOULD BE RECOMMENDED BEFORE THE
LIMIT SWITCHES ARE ENGAGED.
Open
gate stop
30 - 50 mm
electromechanical operator for sliding gates
right-hand
DX bracket
!
!
5 mm
19
Pic. 11
Close
gate stop
!
30 - 50 mm
Pic. 12