Publicité
Les langues disponibles
Les langues disponibles
respiratory system.
• Only use the battery pack provided with the tool. The use of other types of batteries may
increases the risk of electric shock, personal injury and damage.
• The batteries are not replaceable. If the batteries become defective or damaged, do not use
the lamp and do not attempt to recharge the batteries. Discard the product. The battery pack
terminals may be short-circuited causing damage to the battery or burns or a fire.
IV. GETTING STARTED
4.1- Unpacking
• Remove the product from carton and discard all packaging properly.
• Check if the product and accessories (if any) are intact.
4.2- Content
PRLUMSOL4/200
• Lamp head x 3
• Lamp head support tube x 3
• Lamp head arm x 3
• Remote control x 1
• Upper tube x 1
• Main tube x 2
• Top cover x 1
• Connector x 2
• Base plate x 1
• Screw x 15
• Anchor x 4
• Butterfly wing nut x 12
• Allen wrench x 1
4.3- Assembly
WARNING!
Before assembly or intervention on product, ensure that switch is set on the "OFF"
position.
ATTENTION!
The lamp should be permanently mounted on a sturdy support where the solar
panel can be easily reached by direct sunlight.
PRLUMSOL4/200
①
Align and insert the poles of lamp head
arm into the Lamp head support tube.
PRLUMSOL4/050 and PRLUMSOL4/080
• Lamp head x 1
• Main tube x 1
• Remote control x 1
• Base plate x 1
• Spike x 1
• Screw (short) x 3
• Screw (long) x 3
• Anchor x 3
②
Fix the parts with butterfly wing nuts.
Page 15 / 33
Publicité
