Installation - Vortice VORT KRYO-POLAR EVO Notice D'emploi Et D'entretien

ENGLISH

Installation

Installation of the exhaust hose
1. Installation with panels (sliding or sash windows) (fig.2, 2A, 2B)
- Insert the hose (only supplied one) into the hole on the rear side, use the internal adaptor provided (fig. 2).
- Insert the end of the hose into the hole in the panel (fig. 2A)
- The additional panels are extensions; if they are too long, it is possible to cut off the excess portion to ensure
perfect coverage of the opened compartment in the window.
Note: the appliance must be positioned at a distance from the window or wall of no less than 50 cm
(fig.2B, fig. 3).
2 2A
2B
26