Vortice VORT KRYO-POLAR EVO Notice D'emploi Et D'entretien page 30

ENGLISH
NOTE: Before using the unit, please do open the horizontal louver. Adjust the louvers to your desired direction
(Fig. 14)
14
Turning ON/OFF - automatic mode (fig. 13)
Press ON/OFF button (D), the unit will start in automatic mode (Auto: indicator '5' led lights up in white).
The system automatically selects the operating mode
models) modes, depending on the room temperature and setpoint adustment. The unit is preset as follows:
room temperature ≥ 24°C: the unit will work in cooling mode (preset temp. value: 24°C, indicator for COOL
1.
mode "6">) lights up in white).
2.
20°C < room temperature < 24°C: the unit will work in fan mode at low speed (indicator for FAN mode "7"
and low speed indicators '4' light up in white).
3.
room temperature < 20°C: the unit will work in heating mode (indicator for HEAT mode "9" lights up in white).
Setting mode/function (fig. 13)
Press MODE button (C) to select required working mode: Auto, cooling, fan, dehumidify (dry), heating (only for
models 11 HP, 13HP) or TiO 2 function (only for model 11 PUR AIR). LED indicator of your selected mode lights
up.
Setting temperature
1. Press 'Temperature up' (G) or 'Temperature down' (H) button to regulate the temperature you desire.
2. The display window will show the temperature you set as you press 'Temperature up' or 'Temperature down'
button. Otherwise, it will always show the ambient temperature.
3. The pre-setting temperature of this machine is: 24°C for cooling.
Setting ventilation speed
Press SPEED button (B) to choose the ventilation speed you need:high (indicators "2,3,4" light up simultaneously),
medium (indicators "3" and "4" light up simultaneously) or low (indicators "4" lights up).
Setting timer
1. Press TIMER button (A) to set the operating hours you desired (1 to 24 hours, timer indicator "1" turns on).
When the set time has been reached, the machine will turn off automatically. The display window will show
the hour(s) you set as you press TIMER button (A). If the timer button is not pressed, the unit will work con-
tinuously.
2. By pressing the timer but without turning on the other functions, you can PRE-SET the time for the machine
to work. For example, if you set the timer to '2', the unit will start automatically after 2 hours.
Cooling mode
1. The indicatore "COOL" ("6") is always on.
2. Fan speed can be selected as high, medium or low, and the corresponding indicator lights up.
30
and operates in Cool, Fan, or Heat (Only 11 HP, 13 HP