Vortice VORT KRYO-POLAR EVO Notice D'emploi Et D'entretien page 27

ENGLISH
2. Exhaust the hot air through the window or wall (Fig.3)
- Drill a suitable hole in the window / wall
- Clip the exhaust hose and unit adaptor to the back of the air conditioner. Use only the hose provided.
- Insert the end of the hose into the hole (fig. 4)
- The hot air extraction hose supplied with the appliance can be extended by 300 to 1500 mm; It is best to use
the smallest possible extension;
- Take care not to form kinks in the hose: the accumulation of hot exhaust air could cause the overheating of the
appliance and consequent blocking of the system (fig. 5,6,7).
- The lenght of the hose has been carefully calculated to match the specifications of the appliance. You are advised
not to replace the hose or extension as this may lead to a fault developing (fig.7a).
3
7
4
7a
27