Joycare SICUROFIX Mode D'emploi page 30

GB
Click
• Grasp the seat body to check the seat if it is fastened tightly or shakes.
If the seat shakes and the ISOFIX connectors are pulled out, please repeat
the above steps and install it again.
• Pull the tether strap on another end back to tighten the top tether.
CAUTION
If the top tether is tightened favorably and correctly, a green mark will
turn up on the other end of the strap release button, please do check it.
30
• Push the ISOFIX connectors directly into
the anchorages until heard an audible
sound "click".
• Pull out the top tether and press the
tether strap release button to extend the
strap until it is long enough to hook the
user-ready tether anchorage behind.
• Hook the tether strap hook onto the
user-ready anchorages. Check there
maybe are 3 anchorages for the hook,
please find one in your favor.