Certification; Use In The Vehicle - Joycare SICUROFIX Mode D'emploi

GB
size class B1.
• Only suitable if the approved vehicles are fitted with 3 point static/with retractor safety-belts, approved
to UN/ECE Regulation No. 16 or other equivalent standards.
• If in doubt, consult either the child restraint manufacturer or the retailer.
The correct fitting of the ISOFIX and Top Tether anchoring systems or 3-point belt is of vital importance
for the safety of your child.
The product must only be used on a forward facing seat that is fitted with the ISOFIX and Top Tether
anchoring systems or 3-point belt which is approved according to ECE R16 or an equivalent standard.
The product may be used on either the front or the back seat. However, we recommend that it is fitted
on the back seat.
The product has been approved according to the strictest European safety standards (ECE R44/04) and is
suitable for Group I (9-18kg) with the ISOFIX and Top Tether anchoring systems, Group II (15-25kg) and
Group III (22-36kg) with 3-point belt, or 3-point belt and additional anchors.
1. SUITABILITY

1.1 Certification

... as a child safety seat installed in a vehicle.
Tested and certified according to ECE R 44/04
Joycare Child Safety Seat
Group Body Weight
JC-1292 / JC-1293/JC-1294
I+II+III 9- 36kg
The child safety seat has been designed, tested and certified according to the requirements of the
European Standard for Child Safety Equipment (ECE R 44/04).
The seal of approval E (in a circle) and the approval number are located on the approval label (sticker on
the child safety seat).
This approval will be invalidated if you make any modifications to the child safety seat. Only the
manufacturer is permitted to make modifications to the child safety seat.

2. USE IN THE VEHICLE

WARNING
DO NOT use with 2-point belt. Please install with the 3-point belt.
Please observe the regulations applicable to your particular country.
The safety belt must be approved to ECE R 16 or a comparable standard.
24