VelLight LEDA84NW Mode D'emploi page 6

Remarks

Adjust the sensitivity to your needs, but remember that even the slightest movement from near
persons or objects can trigger the sensor. Lower the sensitivity if the lamp switches on
unintentionally.
7.2 Installation
Refer to the illustration on page 3 of this manual.
Remarks

Install the lamp away from curtains, trees and other moving objects.

Install the lamp away from high temperature or humidity.

Always cut off the power before installation.

When installing two or more lamps, keep them at least 4 m apart.
8. Cleaning and Maintenance

This lamp does not need any particular maintenance.

Occasionally wipe the lamp with a damp cloth. Do not use harsh chemicals, cleaning solvents or
strong detergents.
9. Technical Specifications
electrical data
power LED module
total nominal power
nominal voltage driver
power factor
energy consumption (kWh/1000 h)
relay output
light technical data
colour
colour temperature
beam angle
luminous flux
colour rendering index
starting time
warm-up time (60 %)
lifespan
nominal life time
number of switching cycles
dimensions LED module
weight
motion sensor
detection range
frequency
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.velleman.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 04 – 24/02/2016
LEDA84NW
72 x 2835 LEDs
10 W
230 VAC
> 0.5
10
max. 200 W
neutral white
4000 K
120°
550 lm
> 80
< 0.5 s
< 1 s
20.000 h
10.000
Ø 281 x 103 mm
1015 g
2 m, 6 m or 14 m (diameter) adjustable
5.8 GHz
6 ©Velleman nv