LENCO DAR-081 Mode D'emploi page 9

3. Place the furthest end of the cover in position on top of the battery compartment. Then press the
nearest end of the cover until you hear it click firmly into place.
If the distance required between the remote control and the appliance decreases, the batteries are exhausted. In
this case replace the batteries with new ones.
Auto standby
When playing media from a connected device, the device automatically switches to standby if:
•
No button is pressed for 10 minutes,
•
No audio from a connected device for 10 minutes.
Operation
Press the POWER button once to turn ON and hold the button to power OFF the unit.
Adjusting the volume
Rotate the Volume knob clockwise or press the Volume + on remote control to increase the volume.
Rotate the Volume knob counter-clockwise or press the Volume - on remote contro to decrease the volume.
The display will show the volume setting.
Adjust the Tone
Rotate slowly the Tone knob to adjust the tone quality.
Adjust the Treble
Rotate the treble knob clockwise to increase the TREBLE
Rotate the treble knob counter-clockwise to decrease the TREBLE
Adjust the Bass
Rotate the Bass knob clockwise to increase the BASS
Rotate the Bass knob counter-clockwise to decrease the BASS
Adjust the Balance
Rotate the Balance knob clockwise to increase the right channel
Rotate the Balance knob counter-clockwise to increase the left channel
Mute function
Pressing the MUTE button on remote control will mute the volume. "Volume Muted" will appear on the display.
Press this button again to cancel the mute function.
Clock and Timers
9