LENCO DAR-081 Mode D'emploi page 17

Input
Music power
Speaker Driver
Batteries in remote control
DAB Frequency
FM Frequency
Bluetooth Frequency:
Bluetooth Version:
EIRP / RF output power:
Power consumption
Power consumption (standby)
Operating Temperature
Operating position
Dim. unit
Weight
Adaptor specifications
•
Adaptor manufacturer name or trademark: Shenzhen Boshenggao Techn.Co., Ltd, 106 Fuyuan Rd. St Baoan
District Shenzhen Guangdong 518103, China
•
Adaptor model number: BSG065-1504000EU
•
Input voltage and frequency: 100-240V, 50/60Hz
•
Output voltage, current, power: 15.0V, 4.0A, 60W
•
Average active efficiency: 89.10 %
•
Efficiency at low load (10%): 80.2%
•
No-load power consumption: 0.10W
Remark: The maximum connection distance is around 10 meters. Please place your Bluetooth device as close as
possible to this device to avoid connection getting disturbed.
WARNING! Risk of hearing impairment
•
Set a low volume on the playback device before connecting headphones.
•
Avoid excessive volume, particularly over extended periods or frequent use. Excessive
volume can result in permanent hearing impairment.
About the disks
AC 100-240V ~ 50/60Hz
2 x 15W RMS
3Ω, 8W,4pcs
2x1.5V AAA / UM4 /LR03(not included)
174.928 - 239.200 MHz
87.5 - 108 MHz
2402 - 2480MHz
V5.0
<3.56dBm
Max 50W
< 1W
0°C-35°C
Horizontal
425 x 280 x 135mm
4.8 kgs
Handling
Do not touch the underside of disks.
Hold disks by the edges to avoid leaving fingerprints on the surface. Any
dust, fingerprints or scratches may cause a malfunction.
Never affix a label or sticky tape to the disk.
Storage
Put disks back in their case after use.
Never expose disks to direct sunlight or heat sources. Never leave disks inside a
car parked in full sunlight.
Cleaning
Use a clean, soft, lint-free cloth to clean the disk, working from the center
outwards in a straight line. Do not use solvents such as petrol, thinners,
commercially available cleaners or antistatic sprays for vinyl disks.
17