LENCO DAR-081 Mode D'emploi page 14

Preset Store (Save a Station):
3.1.
You may store your preferred FM stations to the preset station memories. There are 50 memory
presets in your radio. Presets are remembered by your radio in the event of a power failure.
In FM menu, select [Preset store] with  and , then press [ENTER]. Press the "previous or next"
buttons to select a storage space, then press [ENTER] to confirm the desired preset number under
which you will store the station you are currently playing. Press [ENTER] to confirm.
Bluetooth Mode
You must follow several steps to connect your mobile phone:
Activate Bluetooth from your mobile phone (please refer to your phone's user manual)
1.
Press POWER button to turn on the unit, then press the MODE button repeatedly until the "Bluetooth
2.
searching..." indicator appears on the LCD display. It will be ready to pair automatically.
Use your mobile phone to search for the Bluetooth device named "Lenco DAR-081/Lenco DAR-281".
3.
Select "Lenco DAR-081/Lenco DAR-281" on your phone and it present the option to connect or not.
4.
Please connect to it using the password "0000" (if any). When you are successfully connected, the
Bluetooth indicator "Bluetooth connected" appears on the LCD display.
Automatically Connecting with Your Phone
Pairing is only needed the first time the unit and phone are used together. When the unit and phone have been
paired once, they will automatically connect when the unit is on and Bluetooth is activated on the phone. The next
time you power on, the unit will automatically connect to the most recently connected mobile phone.
Play from Bluetooth Device
After successful Bluetooth connection, press the
backwards or forwards. To pause or resume play, press
disconnect all paired Bluetooth devices.
Playing a compact disc (CD)
NOTE: Never touch the laser lens inside the CD compartment. Clean the laser lens using a CD cleaner disc if it
becomes dirty.
Press the POWER button to turn on the unit.
1.
Press the MODE button repeatedly to select the CD function.
2.
Press the button to open the CD door and insert a CD into the tray (with printed label side facing
3.
up).
Press the button again to close the CD DOOR and the disc will rotate for a few seconds, then play the 1st
4.
track automatically.
To temporarily stop playback, press the
5.
6. Press the button to STOP play.
REVERSE/FORWARD
The and Buttons used to jump to a different track number or hold to scan disc tracks at high speed.
1.
Press the button once to skip to the beginning of the current track. Press it two or more times to hear
2.
previous tracks on the disc.
Press the button to start playing the next tracks on the disc.
3.
Press and hold the
4.
button, and to resume playback, press it again.
button; The current track will be rewarded towards the start of the track
button to play. Press the
the button again. Press and hold the button
14
or button to skip the tracks
to