Clatronic DBS 2521 Mode D'emploi page 30

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
38419-05-DBS 2521
GB
Always remove the mains lead before cleaning!
Wait until the machine has cooled down completely.
Clean the casing with a slightly damp cloth.
The base should be cleaned with a slightly damp cloth. Do not use any abrasive
cleaning agents!
The machine is fitted with an anti-limestone cartridge (9). You may use either tap
water or distilled water. Do not use any decalcification agents! These will destroy
the machine!
The lifetime of the anti-limestone cartridge (9) depends on the frequency of use
and the hardness of the water. It is recommended that if the water hardness is 2
and the average ironing time approx. 3 hours per week, the anti-limestone car-
tridge (9) should be replaced every 8 to 10 months.
This appliance conforms with the CE directives for radio interference suppression
and low-voltage safety and has been built to meet current safety requirements.
Subject to technical changes without prior notice!
We undertake to guarantee the appliance sold by our company for 24 months as of
the date of purchase (cash receipt).
During the life of the warranty we shall provide for the repair or replacement of the
appliance owing to material or manufacturing defects absolutely free of charge.
Proof for the warranty is provided by the purchase document. The replacement and
repair will not be performed free of charge without this proof of purchase.
Should the warranty be valid, please consign the complete appliance in its original
packing together with the cash receipt to your local dealer.
You are not entitled to the replacement of the appliance owing to broken glass parts
and faulty accessories. However, said parts will be replaced free of charge. In this
case only the faulty accessory needs to be ordered without sending back the whole
appliance!
The cleaning, servicing and replacement of wear parts are not covered by this war-
ranty and hence are to be paid for.
The warranty is terminated in case of handling on the part of Third parties.
Once the warranty has expired, repairs can be carried out by specialized technici-
ans or repair services against the payment of the service.
30
16.01.2003 16:44 Uhr
Cleaning
Warranty
After the warranty
Seite 30

Publicité

Table des Matières
loading

Table des Matières