Publicité
Les langues disponibles
Les langues disponibles
• The appliance must not be used in dusty environments or in the presence of floating
materials or used in a room where there is a fire risk.
• Stand the appliance on a smooth, horizontal surface or table; do not place it on a inclined
surface (the appliance could fall over).
ASSEMBLY
Before each use, verify that the unit is in good condition, the electric cord is not damaged,
if the power cord is damaged, it must be replaced by the manufacturer or a competent
qualified electrician or a person with similar qualifications, in order to avoid any risk.
If in doubt, have the appliance checked or assembled by a qualified professional person.
For assembly, refer to figure.
Attention: the fan can be used only when completely and correctly assembled, that is
complete with its base and protection grid.
Attention: always unplug the appliance before you assemble.
Stand
Unscrew and remove the ring nut (5) from the column, insert the ring (17), and tighten
the ring nut again.
Set the column (11) in place on the base and secure it using the screws with nut (10)
while also engaging the counterweight.
Make sure column and base and counterweight are firmly coupled.
1)
Motor shaft
2)
Oscillation button
3)
Body
4)
Body attachment screw
5)
Pole attachment ring nut
6)
Handle
7) Base with counterweight
8)
Selector
9)
Adjustable pole
10) Screws with nut
11) Fixed pole
12) Front grille
13) Fan attachment ring nut
14) Fan
15) Grille attachment ring nut
16) Rear grille
12/36
Publicité
