Publicité
Les langues disponibles
Les langues disponibles
Installing your thermostat
2 Remove old thermostat faceplate
and leave wires connected.
2a Take a picture of the wire
connections for later reference.
3 Label wires.
Do not label by wire color.
supplied sticky tags to label each
wire as you disconnect it. Label wires
according to the old thermostat
terminal designations, not by wire
color.
Note:
If no tag matches a wire
terminal label, write the terminal
label on a blank tag.
Use the
5
If you have an older thermostat with
a sealed mercury tube, turn to page
ii for proper disposal instructions.
C
Terminal designation
C
MCR33823
Sticky tags
Blank sticky
tags
Terminal
designation
MCR31537
69-2715EF—07
Publicité
