Unregistering thermostat
If you remove the thermostat from your
Total Connect Comfort website account
(for example, you're moving and leaving
the thermostat behind), the thermostat
will display Register at Total Connect until it is
re-registered.
Disconnecting Wi-Fi
Replacing your router
If you disconnect the thermostat from your Wi-Fi
network:
1 Enter system setup (see page 30).
2 Change setting 39 to 0 (see page 32).
The screen will display Wi-Fi Setup.
Re-connect to a Wi-Fi network by following the steps on page 16.
Turning Wi-Fi off
If you do not plan to control the thermostat remotely, you can remove the Wi-Fi Setup
message from the screen:
1 Enter system setup (see page 30).
2 Change setting 38 to 0 (see page 32). Wi-Fi Setup will be removed from the screen.
If you want to connect to the Wi-Fi network later, change setting 38 back to 1.
69-2715EF—07
26
M33876
M33876
M33855