Publicité
Les langues disponibles
Les langues disponibles
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed (all models)
■ Drill
■ 1.18" (3.0 cm) drill bit
■ .11" (3.0 mm) drill bit for pilot holes
■ Pencil
■ Wire stripper or utility knife
■ Tape measure or ruler
■ Caulking gun and weatherproof caulking compound
■ Flat-blade screwdriver
■ Phillips screwdriver
Models PUCFS130SS, PUCFS130BL
(ducted or non ducted (recirculation) installation)
Parts Supplied
■ 2 - 3.5 x 9.5 mm screws.
■ 3.2" x 10" (8.3 x 25.4 cm) rectangular vent connector.
■ Rectangular Carbon Filter. Accessories part No. TM02DC
WARNING
When used in recirculation mode, to reduce the risk of fire and
electric shock use only conversion kit model TM02DC.
Tools and Parts
■ Saber or keyhole saw
■ Metal snips
■ Compass or 8" (20.3 cm) circle template
Parts Supplied (all models)
■ 4 - 3.5 x 9.5 mm mounting screws
Parts Needed (all models)
■ 3 - UL listed wire connectors
■ Vent clamps
For cabinets with recessed bottoms:
■ Two 2" (5.1 cm) wide filler strips. Length and thickness
determined by recess dimensions.
■ Four flat head wood screws or machine screws with washers
and nuts (to attach filler strips).
Accessories
Parts Needed
■ Wall or roof cap to match vent system
■ 1 - 75W max, 120V incandescent light bulb.
■ 3.2" x 10" (8.3 x 25.4 cm) rectangular metal vent system
For non-vented (recirculation) installations:
Recirculation kit included. Accessories part No. ERSRCK30
4
Publicité
