Publicité
Les langues disponibles
Les langues disponibles
GETTING STARTED
3
Install and secure the thumb screws on
both sides by hand.
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
5
Make sure the power switch is OFF.
Securely attach the removable power cord
into the back of blender. Plug the Blender
into a grounded 3 prong outlet.
6
4
Secure the front cover to the back cover.
WARNING
Electrical Shock Hazard
6
Flip the power switch to ON (I).
The status indicator light will flash,
indicating that the Blender is in Standby
mode and ready to operate.
Publicité
