Télécharger Imprimer la page

SOLAC PV1651 Mode D'emploi page 9

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
• The appliance's plug must fit into the mains
socket properly. Do not alter the plug. Do not
use plug adaptors.
• Do not leave the appliance out in the rain or
exposed to moisture. If water gets into the
appliance, this will increase the risk of electric
shock.
• Do not force the power cord. Never use the
power cord to lift up, carry or unplug the
appliance.
• Do not allow the power cord to hang or to
come into contact with the hot surfaces of the
appliance.
• Check the state of the power cord. Damaged
or tangled cables increase the risk of electric
shock.
• Do not touch the plug with wet hands.
• Do not use the appliance if the cable or plug is
damaged.
• If any of the appliance casings breaks, immedia-
tely disconnect the appliance from the mains to
prevent the possibility of an electric shock.
• Do not touch the heated parts of the appliance,
as it may cause serious burns.
USE AND CARE:
• Fully unroll the appliance's power cable before
each use.
• Use the appliance handle, to catch it or move it.
• To keep the non-stick treatment in good condi-
tion, do not use metal or pointed utensils on it.
• Respect the MAX level indicator. (Fig.1).
• Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
• This appliance is for household use only, not
professional, industrial use.
• Store this appliance out of reach of children and/
or persons with physical, sensory or reduced
mental or lack of experience and knowledge.
• Do not store or transport the appliance if it is
still hot.
• Keeping the iron in its housing support at
maximum temperature for too long time, may
cause its colour change, which will not affect the
correct working order of the appliance.
• For a correct operation, keep the soleplate in
proper conditions does not operate over metal
objects (ironing board metal parts, buttons, zips
etc.).
• It is advisable to use distilled water, especially
if the water in your area contains clay or if it is
"hard" (containing lime or magnesium).
• Check that the lid is closed properly before
starting the appliance.
• Never leave the appliance connected and unat-
tended if is not in use. This saves energy and
prolongs the life of the appliance.
• Never rest the appliance into a surface while in
use.
• Do not use the appliance on any part of the
body of a person or animal.
• Do not use the appliance with pets or animals.
• Turn the thermostat control to the minimum
(MIN) setting. This does not mean that the iron
is switched off permanently.
SERVICE:
• Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer's liability null and void.
DESCRIPTION
A Steam blast button
B Filling spout
C soleplate
D Pilot light
E Dual voltage selector
F Steam regulator
G Steam flow and temperature regulator
H Foldable handle button
INSTRUCTIONS FOR USE
BEFORE USE:
• Remove the appliance's protective film.
• Ensure that the selected tension on the voltage
selector coincides with the tension of the mains.
• To eliminate the smell given off by the appliance
when used for the first time, it is recommended
to have it on at full power for 2 hours in a well-
ventilated room.
• Prepare the appliance according to the function
you wish to use.
VOLTAGE SELECTOR:
• The appliance has a voltage selector control,
situate the selector according to the type of vol-
tage available in the mains where the appliance
is to be connected. (Fig.2).
FILLING WITH WATER:
• It is essential to have filled the deposit with
water to be able to work with steam.
• Open water inlet lid.
• Fill the deposit taking care to observe the MAX

Publicité

loading