Optika Italy C-HP4SC Manuel D'instructions page 7

8. Assembling
8.1 C-HP4SC
1. Using the supplied screws, join the fixing plate mounted on
the camera ① and the fixing plate mounted on the monitor
②. (Fig. 1)
2. Screw the "C" mount adapter ③ to the camera ④. (Fig. 2)
3. Loosen the clamping screw ⑤ on the trinocular port and
remove the dust cap ⑥. (Fig. 3)
4. Insert the round dovetail of the "C" mount into the empty hole
of the trinocular port, then tighten the clamping screw ⑤.
(Fig. 4)
①
②
③
Page 7
⑥
F ig. 1 F ig. 1
④
F ig. 2 F ig. 2
⑤
F ig. 3 F ig. 3
⑤
F ig. 4 F ig. 4