Publicité
Les langues disponibles
Les langues disponibles
9149147
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2.
Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3.
Only use accessories intended for use with this tool. Follow instructions
for changing accessories.
4.
Keep the tool handles or gripping surfaces clean and dry.
5.
Maintain the tool' s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
RECHARGING THE HOT STAPLER
The hot stapler has built-in protection from overcharging or overheating.
1.
Check the indicator lights to determine if you need to recharge the
battery.
2.
Lift the waterproof cover.
3.
Insert the USB-C charging cableplug into the USB-C port.
4.
Plug the USB plug into a power supply's USB port.
5.
The glowing LEDs will indicate the battery's charge level.
6.
Remove the charge cable and close the waterproof cover once the battery
is fully charged.
BATTERY MAINTENANCE
The battery is integrated with the hot stapler and cannot be removed.
1.
The longest life and best performance can be obtained if the battery is
charged when the air temperature is between 50 to 86°F (10 to 30°C). Do
not charge the battery when the temperature is below 32°F (0°C) or above
104°F (40°C). This is important and will prevent damage to the battery.
2.
Charge the battery at rates recommended by the manufacturer.
•
The charging current is 1A. It takes approximately 2 hours to
completely charge the hot stapler.
www.princessauto.com / 1-800-665-8685
CORDLESS HOT STAPLER KIT
V1.0
Page 8
Publicité
