Publicité
Les langues disponibles
Les langues disponibles
9149147
1.
Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an unintended
purpose.
2.
Do not use the tool if any parts are damage broken or misplaced. Repair or
replace the parts.
3.
Do not touch the staple after inserting it into the heating elements to
avoid a burn injury.
4.
Do not place your hand under the plastic workpiece when applying a
staple, as it may burn through and cause a burn injury.
5.
Do not touch the heated plastic until it has time to cool to avoid a burn
injury.
POWER TOOL PRECAUTIONS
1.
Do not use any power tool with a malfunctioning power switch or control.
A power tool that fails to respond to the controls is dangerous and can
cause an injury. A qualified technician must repair and verify the power
tool is operating correctly, before it can be used.
2.
Shut the power off and disconnect the hot stapler from the power
supply (if possible) before making any adjustments, changing accessories,
cleaning, servicing or when storing. Such preventive safety measures
reduce the risk of starting the tool accidentally.
USB CABLE
1.
Only use USB cables designated for your tool or device. Check that the
USB connector has the USB logo. Using the wrong cable can damage your
tool/device or cause an injury.
a.
USB-A and USB-B cables carries 5 volts with a current of 0.5 to
0.9 amps. USB-C carries 20 volts with a current of 1.5A, 3A or 5A,
depending on the cable's USB specification.
2.
Do not charge this tool if the USB cable is frayed or damaged, as an
electric shock or surge may occur, resulting in a personal injury or
property damage.
3.
Discontinue use if the USB cable feels more than comfortably warm while
operating the tool.
4.
Keep all connections dry and off the ground to reduce the risk of electric
shock. Do not touch the USB connector or cable with wet hands.
www.princessauto.com / 1-800-665-8685
CORDLESS HOT STAPLER KIT
V1.0
Page 4
Publicité
