Télécharger Imprimer la page

DeWalt DC390 Guide D'utilisation page 7

Scies circulaires sans fil
Masquer les pouces Voir aussi pour DC390:

Publicité

Les langues disponibles

Les langues disponibles

Thebattery p ack isnotfullycharged outofthecarton. Before using
thebattery pack and charger, read the safety i nstructions
below. Then
follow charging procedures
outlined.
READ
ALL
INSTRUCTIONS
Do not incinerate
the battery pack even if it is severely
dam-
aged or is completely
worn out. The battery pack can explode in
a fire.
• A small
leakage
of liquid
from the battery
pack cells may
occur under
extreme
usage or temperature
conditions.
This
does not indicate a failure. However, if the outer seal is broken and
this leakage gets on your skin:
a. Wash quickly with soap and wate_
b. Neutralize with a mild acid such as lemon juice or vinega_
c. If battery liquid gets into your eyes, flush them with clean water
for a minimum
of 10 minutes and seek immediate medical
attention. (Medical note: The liquid is 25-35% solution of potas-
sium hydroxide.)
Do not carry extra battery packs in aprons, pockets,
or tool
boxes along
with other metal objects.
Battery pack could be
short circuited causing damage to the battery pack and possibly
causing severe bums or fire.
Charge the battery packs only in DEWALT chargers.
DO NOT splash or immerse in water or other liquids.
Do not store or use the tool and battery
pack in locations
where the temperature
may reach or exceed
105°F (40 °-C)
(such as outside sheds or metal buildings
in summer),
Z&DANGER: Never attempt to open the battery pack for any reason.
If battery pack case is cracked or damaged, do not insert into charg-
er. Electric shock or electrocution may result. Damaged battery packs
should be retumed to service center for recycling.
NOTE: Battery storage and carrying caps are provided for
use whenever the battery is out of the tool or charger.
Remove cap before placing battery in charger or tool.
i_ WARNING:
Do not store or carry battery
so that
metal objects
can contact exposed
battery terminals.
For example, do not place battery in aprons, pockets, tool boxes,
product kit boxes, drawers, etc. with loose nails, screws, keys, etc.
without battery cap. Without cap in place, battery could short circuit
causing fire or bums or damage to battery
A CAUTION: Battery pack must be securely attached to tool. If bat-
tery pack is detached, personal injury may result.
The
RBRC
TM
Seal
The
RBRC
TM
(Rechargeable
Battery
Recycling
_-7_,
Corporation)
Seal on the nickel-cadmium
battery (or
battery pack) indicates that the costs to recycle the bat-
tery (or battery pack) at the end of its useful life have
already been paid by DEWALT. In some areas, it is ille-
gal to place spent nickel-cadmium
batteries in the trash
or municipal solid waste stream and the RBRC program provides an
environmentally conscious alternative.
RBRC
TM,
in cooperation with DEWALT and other battery users, has
established programs in the United States to facilitate the collection of
spent nickel-cadmium
batteries. Help protect our environment
and
conserve natural resources by returning the spent nickel-cadmium
battery to an authorized DEWALT service center or to your local retail-
er for recycling. You may also contact your local recycling center for
information on where to drop off the spent battery.
RBRC
TM
is a registered trademark of the Rechargeable Battery Recycling
Corporation.
Important
Safety
Instructions
for Battery
Chargers
SAVE THESEINSTRUCTION$:
This manual
contains
important
safety instructions for battery chargers.
Before using charger, read all instructions and cautionary markings
on charger, battery pack, and product using battery pack.
A DANGER:
120 volts are present at charging terminals. Do not probe
with conductive objects. Electric shock or electrocution may result.

Publicité

loading