Télécharger Imprimer la page

Black & Decker BESTA512 Mode D'emploi page 12

Publicité

Les langues disponibles

Les langues disponibles

English
Troubleshooting Guide
BE sURE TO FOllOW sAFETY RUlEs AnD insTRUCTiOns
For assistance with your product, visit our website at www.blackanddecker.com for a list of service centers, or call the
BLACK+DECKER Customer Care Center at 1-800-544-6986.
PROBlEM
Trimmer will not start.
Cutting line is consumed
quickly in edge mode.
TWO-YEAR LIMITED WARRANTY
Black & Decker (U.S.) Inc. warranties this product to be free
from defects in material or workmanship for a period of
two  2  years following the date of purchase, provided that
the product is used in a home environment. This limited
warranty does not cover failures due to abuse, accidental
damage or when repairs have been made or attempted
by anyone other than BLACK+DECKER and its Authorized
Service Centers. A defective product meeting the warranty
conditions set forth herein will be replaced or repaired at no
charge in either of two ways:
The first, which will result in exchanges only, is to return
the product to the retailer from whom it was purchased
(provided that the store is a participating retailer). Returns
should be made within the time period of the retailer's
policy for exchanges. Proof of purchase may be required.
Please check with the retailer for its specific return policy
regarding time limits for returns or exchanges.
The second option is to take or send the product
(prepaid) to a BLACK+DECKER owned or authorized Service
Center for repair or replacement at BLACK+DECKER's
10
POssiBlE CAUsE
Cord is not plugged in.
Circuit fuse is blown.
Circuit breaker is tripped.
Cord or switch is damaged.
Edging too far from edge of
sidewalks or abrasive surfaces.
The cutting line is hitting the
sidewalk or abrasive surfaces.
POssiBlE sOlUTiOn
Plug tool into a working outlet.
Replace circuit fuse. (If the product
repeatedly causes the circuit fuse to blow,
discontinue use immediately and have it
serviced by an authorized BLACK+DECKER
service center.
Reset circuit breaker. (If the product
repeatedly causes the circuit breaker trip,
discontinue use immediately and have it
serviced by an authorized BLACK+DECKER
service center.
Have cord or switch replaced at an
authorized BLACK+DECKER service center.
Ensure edging wheel is on the edge of the
surface and the cutting line is positioned
in the grass or dirt area to be edged, not
the sidewalk or abrasive surface.
option. Proof of purchase may be required. BLACK+DECKER
owned and authorized service centers are listed online
at www.blackanddecker.com. This warranty does not
apply to accessories. This warranty gives you specific
legal rights aand you may have other rights which vary
from state to state or province to province. Should you
have any questions, contact the manager of your nearest
BLACK+DECKER Service Center. This product is not intended
for commercial use, and accordingly, such commercial
use of this product will void this warranty. All other
guarantees, express or implied, are hereby disclaimed.
lATin AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
check country specific warranty information contained in
the packaging, call the local company or see the website for
warranty information.
FREE WARning lABEl REPlACEMEnT: If your warning
labels become illegible or are missing, call 1-800-544-6986
for a free replacement..
Imported by Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286
BlackandDecker.com
1-800-544-6986

Publicité

loading