ENGLISH
16
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Treat electric tools carefully. Check whether the
moving parts work perfectly and do not drag,
whether not broken or damaged to such an
extent that functioning of electric tools could
be affected. Have any damaged parts repaired
before using the machine. Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
5) Using and treatment of cordless tools.
a) Charge the batteries only in chargers
recommended by the manufacturer. Risk of fire
for a charger suitable only for a certain type of
batteries or, as appropriate, accumulators, if used
for other accumulators.
b) Use only such accumulators in this electric
appliance that have been designed for this
appliance. Use of other accumulators may lead to
injuries and risk of fire.
c) Do not leave an accumulator not being used
near office clips, coins, keys, nails, screws
or other small metal items that could cause
contact bridging. Short circuit between
accumulator contacts may result in burns or fire.
d) Liquid may leak from an accumulator if used
improperly. Prevent contact with such liquid.
Rinse an affected body part with water in case
of accidental contact. If liquid gets to your eye,
seek medical advice.Liquid leaking from a battery
may cause skin irritation or burns.
6) Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
Safety instructions for HEDGE
TRIMMER
Keep all parts of the body in safe distance from
the knife. Do not try to remove the material being
cut or hold material to be cut when the knife is
running. Jammed cuttings to be removed only
when the machine is off and the battery taken
out. A moment of inattention when using the hedge
trimmer may result in serious injuries.
Carry the hedge trimmer by the handle when the
knife is off. Fit the protective cover whenever the
hedge trimmer is to be transported or stored.
Careful appliance handling reduces the risk of injury
by knife.
Hold the power tools by the insulated handles
as the cutting knife may come into contact with
hidden cables/lines. Contact of the cutting knife
with a live conductor may bring the metal parts of the
appliance under voltage and cause electric shock.
Other safety instructions
Keep children and other persons including animals in
a safe distance when using the appliance. Minimum
safe distance is 5 m.
Wear suitable protective clothing such as sturdy
shoes with non-slip sole, robust long trousers, gloves,
safety glasses and hearing protection!
Do not wear loose clothing or jewels. Hear, clothing
and gloves must be out of reach of moving parts
as they could get caught by the rotating parts. Do
not use the appliance when barefooted or in open
sandals.
When being blocked, turn the appliance immediately
off and remove the jammed item.
Before work, check the area for any hidden items such
as wire fences.
When working, keep the appliance firmly with both
hands and with a distance from your body.
Make sure the appliance is off before inserting a
battery.
The ON/OFF switch and safety switch must not be
locked.
Use only those batteries for the power tool that have
been designed to be used for that tool. Use of other
batteries may lead to injuries and a risk of fire.
Before using, check the tightness and proper
seating of all screwed and socket joints and
protective equipment and if all moving parts are
moving smoothly.
It is strictly prohibited to demount, adjust and
alienate the protective equipment on the
machine or put other protective equipment on
the machine.
Do not use the appliance if damaged or the
safety equipment is defective. Replace any worn
and damaged parts.
Do not use the device near flammable liquids or
gases. Risk of fire and explosion in case of short
circuit.
Avertissement: Cet outil électrique génère
pendant le fonctionnement un champ magnétique.
Dans certaines circonstances, ce champ peut
perturber le fonctionnement des implants médicaux