Sherco SE 250i Manuel Du Propriétaire page 84

draining THe COOlanT
2
3
1
Check the fluid level in the expansion container.
The liquid should reach the level on the container
where it indicates "LEVEL"
If the level is not correct, unscrew the cap
with fluid until it reaches the LEVEL mark.
Coolant
de refroidissement
Replace the cap .
3
aTTenTiOn
Make sure the bike is vertical and on a horizontal
surface.
-Place a container under the bike
-Remove the cap
1
-Allow the coolant to drain.
N
nOTe
To protect the environment deposit the drained
coolant at an approved collection center.
Minerva Perma Universal
D 4 -25°C
and screw
3
Fill
3
83