Sherco SE 250i Manuel Du Propriétaire page 104

CHeCKing THe ClUTCH FlUid level
reMOving THe engine gUard
b
1
2
3
1
- Turn the knob in the opposite direction to
b
move the lever away from the handlebar.
Clutch lever free play A
h
aTTenTiOn
- The hydraulic fluid is highly corrosive it can be dan-
gerous to the skin.
- Read the recommendations on the container.
Position the master cylinder horizontally.
- Remove the two screws
and the membrane
- Check the fluid level and fill if necessary.
Level of brake fluid below
the top of the reservoir.
Minerva brake fluid DOT 4
- Reinstall the lid with the membrane and the
screws.
Remove the screws
1
bottom plate.
≥3mm
, the cover
1 2
3
4mm
and nuts and remove the
103