Publicité
Les langues disponibles
Les langues disponibles
3. Make sure the filter holder is not attached and position a
recipient under the hot water spout and coffee outlet (A5)
(fig. 25).
4. Wait for the
and
indicating that the appliance is ready for use.
5. Press and hold the
three buttons flash in sequence.
6. Turn the steam dial to the
7. Press the
button to start descaling.
8. The descale programme starts and the descaler liquid
comes out of the water spout. The descale programme
removes limescale deposits from inside the appliance by
automatically performing a series of rinses and pausesuntil
the tank is completely empty.
Please note:
During descaling, to clean the coffee outlet, close the steam dial
from time to time to deliver small quantities of descaler from
the coffee outlet.
9. The appliance stops operation and the orange
light continues to flash, indicating that descaling is still
underway.
10. The appliance is now ready for rinsing through with clean
water. Extract the water tank, empty, rinse under running
water, fill with fresh water up to the MAX level and put
back in the appliance (If used, insert the water softener
filter).
11. Empty the container used to collect the descaler solution
and replace it empty under the hot water spout.
12. Make sure the steam dial is in the
press the
button to start rinsing.
13. EXPLANATION OF LIGHTS
Lights
lights to come on steadily,
button for 10 seconds until the
position.
position, then
Operation
The ON/OFF button is turned on
When the appliance is turned on
Please note:
During rinsing, to clean the coffee outlet, close the steam dial
from time to time to deliver small quantities of water from the
coffee outlet.
13. When the water tank is empty, the orange light goes out
and descaling is complete.
14. Make sure the steam dial is in the closed position ( ○
symbol).
The appliance is ready for use.
Please note!
•
If the descaling cycle is not completed correctly (e.g. no
electricity) we recommend repeating the cycle;
•
If the water tank has not been filled to the MAX level, at the
end of descaling, the appliance requests a further rinse to
guarantee that the descaler solution has been completely
eliminated from the machine's internal circuits.
Repair of damage to the coffee maker caused by limescale is not
covered by the guarantee unless descaling is performed regular-
ly as described above.
12. TECHNICAL DATA
Mains voltage: ........................................ 220-240V~50/60Hz
Absorbed power: ......................................................... 1350 W
Pressure: ....................................................................... 15 bar
Water tank capacity: ............................................................1 l
Size LxHxD.......................................... 149x305x330 (414)mm
Weight .........................................................................4.04 kg
None of the components or accessories is dish-
washer safe.
Explanation of lights
The appliance performs a self-diagnosis
cycle, indicated by sequential flashing of
the lights
Flashing lights: the appliance is heating
up to make coffee
Lights on steadily: the appliance is ready
to make coffee
The lights flash rapidly: the tank is empty
or the appliance will not make coffee. See
the section "2. Filling the water tank"
11
Publicité
