CASO DESIGN VC100 Manuel D'instructions page 38

15.1 Complete overview
1 Connector - for vacuum hose
3 Cover-unlock – Press buttons on right and left side
4 Cover-lock – to locke the cover, press on the right and left side
If you open the cover, you see:
• the Sealing bar, it contains a heating wire covered with Teflon which allows the bag to
seal but not to stick to the strip.
• Removable vacuum chamber. The open end of the bag must be placed inside the
chamber. This feature makes sure that air cannot escape from the bag and that excess
liquid is removed. Easy to remove and clean.
Warning
The sealing bar gets very hot.
Please observe the following safety notice in order not to burn yourself or others.
► To avoid getting burned, never touch the sealing bar directly after sealing process.
Please note
► Do not remove the Teflon tape (T).
2 Panel
38