Telephone functions
caller is stored together with a name, the name
of the entry and the number are displayed
(see the section "Storing a phone number in
the car sound system" in this chapter).
u
<
Press the
button to answer the call.
"CALL" and the duration of the ongoing call
are displayed.
u
;
Press the
button to reject the call or
to end the current call.
The display shows "CALL END".
Note:
During the call, you can adjust the volume
with the volume control
vice with a short press of the On/Off button
3
.
Making a call
u
In the Bluetooth® menu, select the "DIAL NEW
NUMBER" menu item.
u
Press the
button
menu.
You can now enter a phone number with up
to 20 digits:
u
Turn the volume control
for the respective position.
u
Press the
or
button
or previous position.
Notes:
•
You can also reach the next position by
pressing the ON/Off button
•
While entering the phone number, you
cannot change the volume or mute the car
sound system.
u
<
Press the
button to call the number
entered.
"CALLING" and the dialed number are alter-
nately shown on the display.
As soon as your calling party answers the call,
the display alternately shows "CALL" and the
time of the current phone call.
Upon ending the call, the display briefl y
shows "CALL END".
18
All manuals and user guides at all-guides.com
4
or mute the de-
7
to open the entry
4
to select a digit
7
to reach the next
3
.
Calling an entry in the phone book
Note:
This function is only available if the phone
book of the connected cell phone was trans-
ferred to the car sound system (see the chap-
ter "Additional functions in the Bluetooth®
menu", section "Phone book functions").
u
In the Bluetooth® menu, select the "PHONE-
BOOK" menu item.
u
Press the
button
book.
The display shows the fi rst phone book entry.
Note:
If the phone book has not yet been trans-
ferred, the display briefl y shows "PHONEBOOK
NOT AVAILABLE".
u
Press the
/
button
times to select a diff erent entry.
Notes:
•
Press and hold down the
7
to quickly scroll through the entries.
•
With activated fast browsing, you can se-
lect an entry in the phone book by turn-
ing the volume control
process, the volume cannot be changed.
To switch fast browsing on/off , please read
the chapter "User settings", section "Mak-
ing settings in the "VARIOUS" menu", "FAST
BROWSE" menu item in the operating and
installation instructions.
u
<
Press the
button to call the number.
"CALLING" and the dialed number are alter-
nately shown on the display.
Note:
You can also call an entry in the phone book
via speed dial (see the section "Speed dial" in
this chapter).
Making a call with voice dial
Note:
This function is only available if the connected
cell phone supports voice dial.
7
to open the phone
7
once or several
/
button
4
. During this