Danfoss ERC 211 Guide D'installation page 10

6 - Basic operation
Adjust the setpoint temperature
Initiate a manual defrost
| 10
(short press) SET: adjust setpoint temperature.
UP/DOWN: change the temperature setpoint
(in setting mode the setpoint flashes).
SET: save the temperature setpoint.
DEFROST: press for 3 seconds to initiate a defsost.
DEFROST: press for 3 seconds to stop manual defrost.
The DEFROST icon is shown during defrost.
Installation Guide | ERC 211 DKRCE.PI.RL0.F7.ML