Vitrifrigo Slim Serie Manuel D'instructions page 29

The power source is selected automatically to the DC source.
To secure optimal performance, level your vehicle before operating the
refrigerator
For optimal performances, switch on the refrigerator at least 8 hours before
placing food.
We advise to clean the inside of the refrigerator properly, before using the
refrigerator.
Night mode
To activate Night mode, hold down the corresponding button for one second.
The LED will light above the button and the led on the graduated scale will turn off.
During operation of this mode, it is not possible to change the cooling level.
After 10 hours of operation, Night mode will stop automatically.
The LED above the button turn off and the cooling level returns to the last set.
To turn off Night mode at any time, hold down the corresponding button for one
second.
With Night mode active, the rotation speed of the compressor is the lower, in this way
noise and electrical consumption are minimized.
ATTENTION The temperatures inside the refrigerator and the refrigerator will go up
by activating this mode. Only activate it when you need to save energy at night.
Turbo mode
To turn on the Turbo mode, hold down the button for one second.
The LED will light above the button and the led on the graduated scale will turn off.
During this feature is active, it's not possible change the cooling level.
To turn off Turbo mode at any time, push the button for one second.
The LED above the button will turn off and the cooling level will return to the last set.
With Turbo mode active, the rotation speed of the compressor is the highest.
Activate it when you want to cool down the fridge as quick as possible.
As soon as the lowest temperature is reached, turbo mode turn off automatically and
the cooling level returns to the last set for a specific time depending on the model.
Cooler level setting Slim 90 and 150
After switching on the refrigerator, for set the cooling level push the switches +/-. With
the button indicated by the simbol "-" the set decreases to the minimum step, while
whit the switch indicated by the simbol "+" you reach the maximum step.
ENG
29