Vitrifrigo Slim Serie Manuel D'instructions page 27

Section (mm^2)
2.5
4
6
10
• Cable size: Battery and electronics connection.
12 V cut-out V
10,4
Protect the DC power line with a suitable min. 20A circuit breaker. Provide a fuse close to
the positive battery pole and a 15A fuse for 12 VDC power supply and 7.5A for 24 VDC
power supply.
9. START-UP
At the end of the installation, check the continuity of the earth circuit and perform all
electrical safety tests as provided by applicable regulations. Protect and lock cables
properly to prevent accidental cable tractions that may disconnect it from the
connections or that may come in contact with hot parts at temperatures above 50°C or
with sharp parts. If the power cord is damaged, it must be replaced by the manufacturer
or its service technician or, in any case, by a person with similar qualifications, in order to
prevent any risk.
• Make sure that all packing materials have been removed.
• Test all pipes to ensure there is no leakage.
• Check all electrical connections.
• Check whether the drawer can be removed from the appliance.
• Verify that the door can be closed properly.
It's possible manage the fridge compartment as desired by
moving storage shelves and door shelves. The drawer in the
models where it is provided is specially designed for bottles,
cans and vegetables. To divide the drawer into compartments
there is a bottle retainer that can be placed at various
distances. The maximum storage capacity of the Slim 150
drawer is 20 kg, while that of the Slim 250 is 35 kg.
After a minimum of 4 hours of cooling the food can be put in
the refrigerator.
RESPECT THE POLARITY
Max line length 12V (m)
STANDARD BATTERY PROTECTION SETTINGS
12 V cut-in V
11,7
2.5
4
6
10
24 V cut-out V
22,8
Max line length 24V (m)
5
8
12
20
24 V cut-in V
24,2
ENG
27