Printing From A Software Application - Sony DPP-SV88 Mode D'emploi

Using your printer with Macintosh computers

Printing from a software application

You can use a software application to print images stored in your computer's
hard disk using the DPP-SV88 Digital Photo Printer.
Notes
• This sections explains the settings and operations using a typical application as an
example. Depending on the application, print settings and operations may differ. For
the details, refer to the manual of your application.
• To get the print you expect, we suggest you use software application that allows you
to check a print preview. Otherwise, set the image size to 1664 (dots) x 2466 (dots)
and the resolution to 403 dpi.
1
Start the application software that you use to print with, and
select the image to be printed.
2
Select "Chooser" from the Apple menu, click "Sony DPP-SV88"
in the "Chooser," and then close the "Chooser."
3
Click "Print Setup" from the "File" menu of the application.
The "Print Setup" dialog box appears.
4
Choose the printer settings.
Paper/Margin
Orientation
Overcoat
Enlarge/Reduce Select the size to be print: enlarged or reduced.
GB
104
To make Post Card Size borderless prints, click "Post
Card Size" and the no margin icon
Post Card Size print, click "Post Card Size" and the
margin icon . To make Small Size prints, click "Small
Size."
To print a wide image, click the landscape icon
To print a tall image, click the portrait icon
Select the overcoat type ("Glossy"/"Texture").
. To make border
.
.