Sony DPP-SV88 Mode D'emploi page 18

1 Connecting the printer
Notes
• While the printer is in the start-up process (while
being displayed), do not insert or remove a CD disc into or from the printer.
Otherwise, an error may occur in saving images on a disc, formatting a disc or
other operations. If an error occurs, turn off and then turn on the printer.
• When opening the disc tray, suspend it with your hand.
• When closing the CD-R/RW tray, make sure to seat the disc firmly over the
CD-R/RW tray hub. If not, you could damage your CD-R/RW drive and you
may not be able to open the tray.
4
Close the disc tray firmly until it clicks into place.
To take out the disc
1
Press the CD-R/RW disc tray open/close button.
The CD-R/RW disc tray comes out.
Note
While the CD-RW indicator lights or blinks, the CD-R/RW is being accessed. You
cannot eject the CD-R/RW disc. Wait until the indicator turns off and then press
the CD-R/RW disc tray open/close button.
2
Remove the CD-R/RW disc from the tray.
To use an 8cm CD-R/RW disc of your CD Mavica digital camera
When you use an 8cm CD-R/RW disc of your CD Mavica digital camera with
this printer, we recommend you use the 8cm CD adaptor supplied with your
CD Mavica.
1
Insert an 8cm CD-R/RW disc into the two tabs of the adaptor in
the order of 1 and 2.
GB
18
1
Label side (Rear side is for recording.)
2
Side with SONY printing (Rear side is shiny.)
is