Disposing Of The Packaging Material; Assembly; Dismantling The Product; Re-Assembly - Steelcase Solo Sit-to-Stand Desk Manuel D'utilisation

_______________________________________________________________
Max. rel. humidity: 80%
■
4.3 Checking the delivery
contents
After unpacking, check the product immediately for
damage sustained during transport and for
completeness; inform the manufacturer of any
damage as soon as possible.
4.4 Disposing of the packaging
material
The packaging consists of the following materials:
Outer cardboard packaging
■
Cardboard edge protectors
■
Plastic strapping
■
These materials are recyclable. Please ensure that
the packaging material is correctly sorted by type
and returned to the recycling process.

4.5 Assembly

Please follow the provided assembly instructions to
assemble the Migration SE product.

4.5.1 Dismantling the product

The Solo Sit-to-Stand Desk can be dismantled into
its partially assembled components.
4.5.2

Re-assembly

Follow the separate assembly instructions in this
regard.

4.6 Electrical connection

Check the electrical equipment of the
desk. Fix loose connections or damaged
cables immediately.
Attach or detach connectors only when
the equipment is de-energised.
The plug of the desk must be easily
accessible at all times.
8
Transport and storage
3
Fig. 4-2: Electrical connections
1 Power lift
2 Control panel
3 Electric motor drive
4 Electric motor drive

4.7 Setting up the product

Setup and use of the product require detailed
planning.
The partially assembled components for the Solo
Sit-to-Stand Desk are supplied directly by the
manufacturer.
The setup location must meet the following
requirements:
Sufficient carrying capacity of the floor
■
Level placement surface
■
Temperature range: +5°C to +35°C
■
Max. rel. humidity: 80%
■
1
4
2
157238