Solo Sit-To-Stand Desk - An Overview - Steelcase Solo Sit-to-Stand Desk Manuel D'utilisation

_______________________________________________________________
Solo Sit-to-Stand Desk
3.4
overview
The illustration shows the Solo Sit-to-Stand Desk
along with its components.
5 Operating and adjusting
to adjust the desk height.
1
3
4
6
6
Fig. 3 1: Solo Sit-to-Stand Desk, Lift 2 variant
1 Desktop
2 Desktop support
3 Telescopic column
4 Runner
5 Control panel
6 Adjusting screw for height levelling
Memory
control panel
Four different memory positions can be entered with
the Memory control panel.
5 Operating and adjusting
to set the memory positions.
3 4
8
6
5
Fig. 3-2: Memory control panel
1 "Up" button
2 "Down" button
6
– an
describes how
5
2
3
5
describes how
1
2
7
3
Button "1" (memory position 1)
4 Button "2" (memory position 2)
5 Button "3" (memory position 3)
6 Button "4" (memory position 4)
7 "SAVE" button
8 Display
The control panel cable is connected to
the power lift. This is under the desktop.
Electrical height adjustment
5 Operating and adjusting
to operate the electrical height
adjustment unit.
The electrical height adjustment unit enables the
adjustment and fixed programming for four optimum
desk heights (sitting height and standing height).
The electrical height adjustment unit essentially
consists of the following components:
Lift 2: Electric motor 650 to 1250 mm
■
Control panel
■
Power lift
■
Product description
describes how
157238