Intended Use; Product Description; Assembling The Product - Invacare Aquatec PICO GREEN Manuel D'utilisation

Aquatec® PICO GREEN
PICO 3in1 GREEN (Fig. 2):
• Seat plate
• Backrest
• Armrest (2x)
• Inner leg tubing (4x)
• Outer leg tubing (4x)
• Clip (8x)
• Anti-slip foot (4x)
• User manual
• Toilet pan with lid
• Toilet pan holder (2x)
• Screws (5x)

8 Intended Use

Aquatec® PICO GREEN is intended to be used as a shower aid.
Users are any adults and adolescents with restricted or
limited movements (e.g.: legs and/or hips). If used without
an assistant, the users must be able to keep their own
balance.
Indication
Restricted or limited movements (e.g.: legs and/or hips) or
having balance issue to stand up or walk due to transitional
or permanent disabilities.
There are no contraindications known when using the
product as intended.
The maximum user weight is 160 kg.

9 Product Description

Aquatec® PICO GREEN is a modular plastic shower chair. It is
composed of a stool with hygiene recess, with four anti-slip
and height-adjustable feet, two removable armrests and one
removable backrest.
Aquatec® PICO 3in1 GREEN is a modular plastic shower- and
toilet chair. It is composed of a stool with toilet opening,
with four anti-slip and height-adjustable feet, two removable
armrests and one removable backrest.

10 Assembling the Product

Installing the Feet (Fig. 3)
CAUTION!
Risk of Trapping
– Take care during assembly.
1. Push the four anti-slip feet completely onto the
height-adjustable telescope tubes.
2. Install the four height-adjustable telescope tubes to the
legs and secure with clips.
3. Install the four assembled legs to the tube ends on the
underside of the seat and secure with clips.
CAUTION!
Risk of Injury or Damage
– Make sure that all eight clips are securely in
place.
All four legs generally should be adjusted to the same height.
As an exception, the front legs may be lowered by one
position to improve the seating comfort when restricted
posture is given due to problems with the coccyx etc.
4
WARNING!
Risk of Tilting
– Never adjust the rear legs to a lower position
than the front legs.
– When lowering the front legs, make sure that
they are lowered by maximum one position.
Installing the Armrests and/or the Backrest (Fig. 4, 5)
1. Insert the armrests from above into the seat plate until
they engage with an audible click (Fig. 4).
2. Insert the backrest from above into the seat plate until
it engages with an audible click (Fig. 5). The backrest
can be installed with the hygiene recess facing forward
or backward. (Fig. 6)
To remove the armrests/backrest press together the
snap-fits on the underside of the seat and pull out
the armrests/backrest.
Installing the toilet pan holders (Fig. 7, 8)
The toilet pan holders can be mounted crosswise (A) or
lengthwise (B).
Five screws are included in the scope of delivery (Fig.
2) for assembling the two toilet pan holders. Only
four screws are required for assembly.
1. Install the toilet pan holders using the delivered screws.
IMPORTANT!
Risk of damage to the product
– The plastic parts can crack when the screws are
overtightened.
– Tighten the screws by hand only.
2. Slide the toilet pan into the holders under the seat.
The product is disassembled in reverse order to assembly.
11 Maintenance
11.1 General Maintenance Information
This product is maintenance-free, provided that the cleaning
and disinfection instructions are adhered to.
11.2 Cleaning and Disinfection
General Safety Information
CAUTION!
Risk of Contamination
– Take precautions for yourself and use
appropriate protective equipment.
1644798-C