Danfoss 088U0213 Instruction page 12

Instruction CF-RF Room Thermostat with InfraRed Floor Sensor
5. Mounting
Placing the Room Thermostat - g. 3
• The Room Thermostat should be placed in
accordance with g. 3
IMPORTANT!
Wherever possible, the room thermostat should
be installed at a place where the e ect of sunlight,
strong arti cial light (e.g. halogen spotlight),
draught, other heat-emitting equipment (e.g. TVs)
etc. is avoided.
! Please note that no furniture, rugs etc. should be
permanently placed within the area of the InfraRed
Floor Sensor as shown in g. 3.
Mounting - g. 2
1. Mount the back plate
and wall plugs
back plate
2. Slide thermostat into place on the back plate
3. If desired lock the thermostat to the back plate
with Allen key
VI.UH.R1.80
via the screw holes
(turn 90°)
Produced by Danfoss Floor Heating Hydronics 01.2006
with the two screws
in the
11