Axis Q1604 Guide D'installation page 12

AXIS Q1604 Network Camera
LED Indicators
Note
• The Status LED can be configured to be unlit during normal operation. To configure, go
to Setup > System Options > Ports & Devices > LED. See the online help for more
information.
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to Setup > System
Options > Maintenance .
Status LED
Green
Amber
Red
Network LED
Green
Amber
Unlit
Power LED
Green
Amber
Status LED Behavior for Focus Assistant
Color Indication
Green Focus Assistant is enabled
The lens is optimally adjusted
Amber The camera has been moved, or an object has been placed in front of the lens.
Exit and restart the Focus Assistant.
The lens is less optimally adjusted.
Red The camera has been moved, or an object has been placed in front of the lens.
Exit and restart the Focus Assistant.
The lens is poorly adjusted.
Indication
Steady green for normal operation.
Steady during startup and when restoring settings.
Flashes red for firmware upgrade failure.
Indication
Steady for connection to a 100 Mbit/s network. Flashes for
network activity.
Steady for connection to a 10 Mbit/s network. Flashes for
network activity.
No network connection.
Indication
Normal operation.
Flashes green/amber during firmware upgrade.
12