VINCENT PHO-300 Manuel D'utilisation page 21

Set up the cable links in a sequence as follows. Connect the power cable between devi-
ce and power supply only after all other connections have been made.
Protective caps
Prior to the first installation the protective plastic
caps must be removed from all the connections
used at the rear of the unit.
RCA connections
Mechanically identical RCA plugs are available for
analogue and digital outputs. Make sure that you
do not get these connections confused during
installation!
Make sure that you do not mix up the analogue con-
nectors for right and left. The RCA plugs for these are
mostly colour coded as follows: red for the right
channel, black or white for the left channel.
INSTALLATION
DURING INSTALLATION PLEASE OBSERVE
THE FOLLOWING ADVICE:
1
O UT PUT
Cable connections
Make sure that all plugs fit tightly. Inadequate con-
nections can cause noise interference, failures and
malfunctions.
2
O U
- wrong -
To make the most of the components' sound poten-
tial, only high quality loudspeakers and connecting
cables, for example Vincent cables, should be
used. Your local stockist will be glad to advise you
about this.
Placement
The phono preamplifier processes very sensitive
electric signals. That is why you should place both
appliances at maximum distance to potential sour-
ces of disturbance like mains cables, mobile pho-
nes, switching power supplies, transformers, com-
puters and main amplifiers.
Power Supply
Use the supplied PHO-300ps exclusively. In case
of a failure please contact your HiFi specialist.
- correct -
21
Vincent