Publicité
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
Push twenty-two HIDDEN CAMS (1F) into the ENDS (A
å
and B), SHELF (E), and BOTTOM (D). Then, insert a CAM
DOWEL (2F) into each HIDDEN CAM, except for the
HIDDEN CAMS in the long edges of the ENDS.
Do not insert CAM
DOWELS into these edges.
Hole
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
www.sauder.com/services
Do not tighten the HIDDEN CAMS in this step.
(12 used)
B
A
Arrow
Scan this QR code or go to this address:
http://qr.sauder.com/?ID=1562
to watch a video on how to assemble your unit.
Arrow
2F
(22 used)
1F
408739
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
D
E
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Arrow
Page 5
Publicité
