Publicité
Step 12
Refer to the enlarged diagram to identify the parts on the
å
HINGES and HINGE BRACKETS.
The DOORS may need some adjustments. Follow the text
å
below to make needed adjustments.
DOOR ADJUSTMENTS:
å
To adjust the DOORS from side to side (horizontal), turn
the adjusting screw in or out.
To adjust the DOORS up and down (vertical), loosen both
å
screws that fasten the HINGE BRACKETS to the END.
Move the DOORS up or down to the desired location.
Tighten the screws after making adjustments.
To adjust the DOORS in or out (depth), loosen the
å
mounting screw one turn and move the DOORS in
or out, as needed. Tighten the mounting screw after
making adjustments.
Adjusting screw (horizontal)
Page 16
Mounting screw (depth)
(vertical adjustment)
408739
Almost time to
celebrate! With a nap.
www.sauder.com/services
Publicité
