Sony Trinitron PVM-1453MD Mode D'emploi page 9

© RGB/COMPONENT A connectors
R/R-Y IN, G/Y IN, B/B-Y IN (BNC)
To monitor the RGB signal
To monitor the component signal
To output the component signal
AUDIO IN (phono jack)
AUDIO OUT (phono jack)
© Ground (¥/6) terminal
Connect a GND cable.
To monitor the RGB signal
To monitor the component signal
AUDIO IN (phono jack)
@ REMOTE connectors
RS-232C (D-sub 9-pin)
REMOTE 1 (8-pin mini DIN)
DC 5V/I1A is output.